MAC Boost Solenoid BCS 4 port 46A-AA1-JDBA-1BA for Dual Port Actuators INCLUDES

Description

GENUINE MAC USA sourced from the same MAC authorised industrial distributor we have been buying from for many years.
Beware of counterfeit  imports from Chinese and other countries outside the USA, even if they are based in the USA.
Universal 4 port boost control solenoid , typically used with wastegates that have 2 ports.  Allows a wider range of boost control than any other method because full boost can be applied on either side of the wastegate diaphragm.  This is used when you need more dynamic range than a 3 port solenoid can provide.  (We also offer Mac 3 port solenoids).
The same valve that many manufacturers re-label and mark up, why pay for a sticker?
Includes (2) stainless steel mounting screws with nyloc stainless nuts.
All the Ports are 1/8 NPT so you can use any common fitting that you want including AN-adapters.
This boost control solenoid  will not degrade from  rich fuel mixtures or oil . Very high life and very resistant to sticking from contamination.
HI TEMP with plug-in black leads (brown wires used to be used for Hi-Temp in the non-plug in version)
Leads are 18" long.
12 volt DC , polarity not sensitive. Only two wires (might be hard to see in picture ).
5.4 watts
10-90% duty cycle, Set you driver to control these at 10-20 Hertz, the lower the frequency the wider the linear range.
1/8" npt ports
compatible with many & most boost controllers and ECU's : AEM,Autronic,E-boost etc,Neptune, Hondata,ECtune,Megasquirt,VEMS.
(2 ) stainless screws with s.s nyloc nuts
This is an industrial quality valve, Autronic,e-boost and AEM have been using them for years on everything from rally cars to drag cars, there is a reason they use this valve, it is very durable and responsive.
Contact us for installation tips.
This valve can be driven by many stock ecu's as well as many aftermarket stand-alones and regular stand alone boost controllers.
See our other items if you are looking for  a 3 port   MAC 35A-AAA-DDBA-1BA
IT IS UP TO the PURCHASER to decide if this valve is suitable for it's intended use the seller will not be responsible for damage of any kind that may occur due to the use of this product!!!
YOUR SHIPPING ADDRESS MUST BE CONFIRMED WITH PAYPAL DO NOT ORDER OTHERWISE.
30 day warranty on items returned if cosmetically perfect. So test it before mounting it! (contact with mounting points may blemish it)
15% handling fee on returned items.
(these valves are all tested before they are shipped and they are very robust ,we have not had any returned to us ever!)